Boosts Total Biological Filtration Capacity Approximately 30%
The Dyna-Max forced air cleansing system allows thorough washing of bead media through a significant increase in turbulence of media prior to back washing. The forced air washing completely breaks up the entire media bed and frees all fine materials that may otherwise remain suspended in the media for further biodegrading. The Dyna-Max system virtually eliminates the possibility of the beads becoming caked together.

Reduces The Water Necessary To Backwash By As Much As 80%
During a normal non-air assisted backwash cycle, the model 4.4 would typically require between 200-300 gallons of water to effectively clean the filter of waste. With the Dyna-Max system you can backwash the same filter with as little as 60 gallons of water. This is most desirable for those wishing to install a larger filter on a pond of a lesser volume of water than the filter is rated for, because very little make-up water has to be added to the pond after a backwash cycle and a much larger fish load can be maintained in a smaller environment.

The Dyna-Max system is standard equipment on models 1.1-B, 2.2-B, 4.4-C and 8.8-C.